While the boundaries of the United States of America may stretch from "sea to shining sea," the broadband access at points in between can tend to be a bit spotty. As the third largest country in the world in terms of area, there's bound to be more than a few desolate sections where broadband service leaves residents wanting. Determined not to leave those people in the the nooks and crannies of the nation in the technological dust, the FCC is going ahead with it's plan to initiate the "Mobility Fund"- an endowment aimed at spearheading the buildout of 3G and 4G mobile broadband networks in the neglected rural regions
of the U.S.

Currently up to 4 million Americans have little to no 3G service due to their habitation of geographically inconvenient areas, barely populated towns or places too distant from network centers. The prior stipulations and standards of the Universal Service Fund (USF), which aimed to assist in the spread of telecommunication service deployment to the farms and more rustic regions, just weren't cutting it. FCC Chairman Julius Genachowski called the status quo "unsustainable" in that it was "designed to support the communications networks of the past, not the future."

Though the technology utilized under the USF may not be of use, the money left over from its operation will come in handy with the implementation of this new program. The Mobility Fund will take between $100 million and $300 Million of capital, some given up by Sprint Nextel and Verizon, for their rural 3G and 4G build out. There's been no talk of the preferred technology of the rural 4G rollout, but it really doesn't seem like the most immediate worry. The most important thing is to get 3G to places where it's lacking first and worry later about LTE vs. WiMax.

Even with the buildout, it isn't guaranteed that the efforts will bring a service of sparkling quality. It's likely that rural deployment won't be without signal issues. We wouldn't be surprised to see an increase in sales of signal boosters to help those with
wireless devices increase their performance on the new network. And if the deployment of 3G to rural areas proves a success we may see a boom of businesses that prefer to operate out of remote regions now that their communications capabilities have been increased, which also stands to benefit the sale of  3G and 4G wireless routers for burgeoning rural work spaces.

We won't know the true effect the implementation of the  "mobility fund" will have on the rural reaches of America until the new networks are in place, but for a nation that considers itself a global superpower, having such a large number of citizens so far behind smacks of weakness. Broadband access is quick becoming a pivotal part of national infrastructure, building an information superhighway is as important as building actual highways once was.

Company’s eighth patent covers an all-in-one form factor for mobile signal boosters

St. George, Utah – Sept. 14, 2010 – Wilson Electronics, manufacturer of North America’s top-selling line of cell phone signal boosters, today announced that the United States Patent and Trademark Office has issued U.S. Patent 7,684,838, the company’s eighth patent related to the amplification of cellular signals.

The patent was awarded for Wilson’s product designs that incorporate a cell phone cradle, cellular signal booster, and antenna into a single unit. Wilson products that make use of the patented technology include the company’s latest universal mobile signal booster, the Sleek, and Wilson’s 2009 iPhone-specific release, the iBooster. 

Combining the various elements of a cellular signal booster into a single unit reduces the number of parts that must be installed and connected. This streamlines the installation process and allows these Wilson mobile signal boosters to readily be moved from one vehicle to another.

“This latest patent and those issued previously are ample evidence of the depth of talent comprising our world-class research and development department,” said Joe Banos, Wilson COO. “Our engineers have more than 150 years combined experience in the design of radio frequency signal boosters and antennas. Their skill and dedication enable Wilson Electronics to build the best quality cell signal boosters available anywhere.”

About Wilson Electronics, Inc.

Wilson Electronics, Inc., a leader in the wireless communications industry for more than 40 years, designs and manufactures a wide variety of cell phone signal boosters, antennas and related components that significantly improve cellular communications for mobile, indoor, and machine-to-machine (M2M) applications. All Wilson products are engineered, assembled and tested in the company's U.S.-based headquarters. Wilson boosters fully comply with FCC regulations for cellular devices and are FCC and Industry Canada type accepted. Wilson Electronics has developed and patented microprocessor-controlled signal booster technology that protects cell sites by preventing network interference from oscillation and/or cell site overload. For more information, visit www.wilsonelectronics.com.

MEDIA CONTACTS

Jonathan Bacon
435-673-5021
Cell: 801-660-7820
jbacon@wilsonelectronics.com

Ken Perkins, 435-986-6252
kperkins@wilsonelectronics.com

The Wilson Electronics Dual-band SignalBoost Desktop DT Amplifier kit is a great cell signal booster for a small office at home or in a building. It boosts the cell signal for a single room. It also works on both the 800MHz and 1900MHz frequencies, meaning it works with all major carriers except the iDen used by Nextel’s Push-To-Talk network.

Below is a great video of how the Wilson Electronics Dual-band SignalBoost Desktop DT Amplifier works. It’s a great cell signal boosting solution for a small office or a single room solution like a dorm room or home office.

Do you have Sprint service inside your home and get a weak cell signal? If you do, then a cell signal booster is what you need. It’s hard to figure out exactly which cell signal booster is right for you. zBoost Wi-Ex YX500-PCS is the perfect cell booster solution for you. It works on the 1900MHz frequency.

The zBoost Wi-Ex 500-PCS series covers 2500 square feet and works with all phones that operate on the 1900MHz . The kit comes with everything you need, including coax connection cable, the outdoor antenna and the base unit.

Installation is simple. Place the outdoor antenna where you get the best cell phone signal. The spot can be on your roof, chimney or somewhere in your attic. It must be placed five feet away from metal in order to not distort the incoming cell phone signal. The coax cable is then used to attach the outdoor antenna to the amplifier, plug in the antenna and you should instantly see an improved signal.

The omni-directional antenna allows users to place it so not to point it towards the cell tower. It can get a signal from more than one cell tower. It comes with 50ft. of cable, so there’s also flexibility where you place the indoor repeater.

You’ll get an improved cell coverage are in your home. No direct connection to the amplifier is necessary. It’s completely wire free. If you want a more improved signal, stand closer to the amplifier located in the house. The closer to the amplifier, the more improved signal you’ll get. There doesn’t have to be a custom install. It’s simple to mount, run the coax cable to the amplifier and you should see an improved signal. If your 3G data runs on the 1900MHz frequency, you should see an improved data on your smart phone.

If you’re in need of an improved cell signal and you use Sprint and the 1900MHz frequency, check out the zBoost Wi-Ex YX500-PCS cell signal booster. It should provide a much better signal for your home. If you’re unsure which frequency your carrier uses, check out WirelessAdvisor.com. Input your Zip code and it will give you a complete list of operators and the frequencies they operate on.

Do you need a cell signal booster and you’re unsure which booster you need? Don’t want to spend a small fortune improving your cell signal? Check out the zBoost Wi-Ex 500 series cell signal boosters.

The zBoost Wi-Ex 500-CEL series covers 2500 square feet and works with all phones that operate on the 800MHz frequency. The kit comes complete with everything you would need, including the base unit, coax connection cable and outdoor antenna.

Installation of the Wi-EX 500-CEL is simple. Place the outdoor antenna in the place where you get the best cell signal. It can be on your roof, chimney or somewhere in your attic. It must be at least five feet away from metal in order to not distort the incoming cell phone signal. The coax cable is then used to attach the outdoor antenna to the amplifier, plug in the antenna and you should instantly see an improved signal.

The omni-directional outdoor antenna means you won’t have to point it in the direction of a cell phone tower. It gets the signal from more than one cell tower because the antenna picks up signal from all 180 degrees. It comes with 50 feet of cable for you to plug the antenna into the base unit.

The set up creates an improve cell phone coverage area within in your home. It means that you don’t have to connect your cell phone to anything. It works completely wireless. The more bars you want on your phone, the closer to the base unit you will have to stand. It works through walls inside your home. It also strengthens the 3G connection on your phone if it works in the 800MHz spectrum.

If you are in need of a cell phone signal and your phone works on the 800MHz frequency only, check out the zBoost Wi-Ex YX 500-CEL edition, you should see an improved signal as soon as you connect the device and turn it on.

Proxim Wireless presents the next great Access Point quality of service and performance to mid-size enterprises. It balances enterprise-scale security, management and quality of service features with a moderate price point.

It’s a dual-mode AP that works on 802.11a or 802.11b/g mode operation. The Proxim Orinoco Wi-Fi Access Point is a starter solution in Proxim’s next-generation line of access points that support large scale voice and video applications. It’s a perfect compliment for a mid-size Wi–Fi broadband networks. Proxim also presents an industry-leading performance with new Super Mode performance. There is a new level of intelligent rogue access point and client detection.

The Proxim AP700 creates sophisticated hot spot interfaces with radius integration. It comes with a pre-standard IEEE 802.11e quality of service support for latency-sensitive applications.

Be proactive about security features to protect your network with the Proxim AP700. ORiNOCO Wi-Fi access points support IEEE 802.11i and AES encryption with proactive security measures like IEEE 802.11X mutual authentication. There are dynamic per-user, per-session rotating keys with rogue access point detection and notification.

There are three secure management interfaces like SNMPv3, SSL and SSH. There are intra-cell blocking to prevent client-to-client snooping Proxim ORiNOCO AP700 excels in simplifying broadband WLAN deployment. Automatic channel selection, adjustable transmit power and external antenna connectors. It comes with wireless repeating functionality in areas without Ethernet wiring.

The Proxim Wavelink Mobile Manager presents powerful group configuration and software updates and automatic alerts. It provides great network management. Proxim brings over 10 years of experience in design and production of LANs. Proxim recognizes service providers and enterprises require the same uptime and reliability in a wireless network as a wired network.

There are several applications for the Proxim ORiNOCO AP700. Small and medium corporations can provide mobile access to improve employee and customer efficiency. Universities can deploy the technology for mobile faculty and student connectivity in dorms, classrooms, libraries and campus common areas.

Hospitals and medical clinics can use the Proxim ORiNOCO AP700 for real-time secure data transfer for better patient care and reduced errors in the transfer of data. Local, state and federal agencies can pass information quickly to serve their constituents better. Public places can set up wireless networks and charge patrons to use the internet in airports, convention centers and hotels. This particular application provides a faster return on investment.

Proxim offers a great Wi-Fi set up solution and the ORiNOCO AP700 is part of great solution for universities, hospitals and other places where a Wi-Fi connection for video and data needs to be transferred quickly.

How does the XLink BTTN work? I want to finally rid my home of a land line and use this as an alternative.

The XLink BTTN allows users to connect three cell phones and your home phones to one line. The device allows users to use their cell phones in their home, ridding users of their land line forever. The XLink BTTN uses Bluetooth technology to communicates with your cell phone, this version has an additional telephone line input. Once set up, all the telephones will ring through your regular telephones.

The connector output from the XLink BTTN works just like the telephone line from the phone company. You are able to connect any regular phone equipment to it, including answering machines. The telephone input means you can connect any analog telephone source to it. This includes the basic phone line from the phone company or VoIP adapters. There’s no additional cords, as long as your cell phone is near the device, your cell phone connects to the XLink BTTN.

The XLink BTTN allows its users to rid themselves of home lines forever. The XLink is a one of a kind product from Quantum-Wireless.com. They’re reasonably priced and can be shipped as soon as you place your order.The device allows users to connect up to three cell phones, meaning users can pool the family plan, plug it into the XLink BTTN and you’ll never need to a land line again.

The Novatel Wireless MiFi Mobile Intelligent Hotspot will now be available for Virgin Mobile. The Virgin Mobile MiFi will be a prepaid device. It means users won’t have to sign up for a lengthy contract after purchasing the Mifi. They’ll be able to buy a certain amount of data and after the data cap is reached, users can buy more data from Virgin Mobile.

The data plans start at $10 for 100MB of data to $60 for 5GB of data. The cost for the device will be $149.99 plus the fees for each data package. It’s a great solution for families that are going on vacation and need an internet connection at a remote vacation home. It also works for business trips. Businessmen take the device with them on a certain amount of data for a presentation or trip. Virgin Mobile is a the prepaid branch of Sprint, therefore it uses Sprint’s 3G network.

It’s a unique offering, it’s the only prepaid MiFi available on the market. The prepaid cell market is growing, especially if you don’t want to sign a long term deal, paying for unused plans. It should be interesting to see what kind of limits the carriers put on the MiFi devices once they tier the data. Verizon and AT&T will probably release prepaid data options like the Virgin Mobile MiFi.

The battery lasts four hours and charges via a USB connection to your laptop. It’s a great way to connect your iPad, iPhone, iPod Touch or other mobile device to Sprint’s 3G network using the Virgin Mobile MiFi device. There’s no lengthy contract to sign like the Verizon MiFi. Users don’t have to worry about which SIM card works in the device like if you purchase the unlocked MiFi 2372.

The Novatel MiFi devices are the first mobile hotspot devices that provide a cloud of internet coverage. It covers about 30 feet, providing up to five devices with a wireless connection.Several international and domestic carriers released their own version of the MiFi device, including Verizon Wireless, Rogers Wireless and Pelephone in Israel.

The unlocked MiFi 2372 works with any data SIM card from any carrier, including AT&T, Telus and Rogers Wireless. The MiFi 2372 works on North American frequencies. The unlocked MiFi 2352 works the same way as the MiFi 2372, users just must get a SIM card from an European carrier like Vodafone, O2 and TeliaSonera.

Quantum-Wireless.com offers a selection of mobile hotspots, including the MiFi devices and Cradlepoint 3G/4G routers. Call 1-877-259-4829 for more information about the MiFi devices along with information on the latest 3G/4G routers.