zBoost Wi-EX YX500-CEL Perfect Single Band Solution for the 800MHz Frequency

zBoost Wi-EX YX500-CEL Perfect Single Band Solution for the 800MHz Frequency

on July 7, 2010  

  • Share
  • Share

Do you need a cell signal booster and you’re unsure which booster you need? Don’t want to spend a small fortune improving your cell signal? Check out the zBoost Wi-Ex 500 series cell signal boosters.

The zBoost Wi-Ex 500-CEL series covers 2500 square feet and works with all phones that operate on the 800MHz frequency. The kit comes complete with everything you would need, including the base unit, coax connection cable and outdoor antenna.

Installation of the Wi-EX 500-CEL is simple. Place the outdoor antenna in the place where you get the best cell signal. It can be on your roof, chimney or somewhere in your attic. It must be at least five feet away from metal in order to not distort the incoming cell phone signal. The coax cable is then used to attach the outdoor antenna to the amplifier, plug in the antenna and you should instantly see an improved signal.

The omni-directional outdoor antenna means you won’t have to point it in the direction of a cell phone tower. It gets the signal from more than one cell tower because the antenna picks up signal from all 180 degrees. It comes with 50 feet of cable for you to plug the antenna into the base unit.

The set up creates an improve cell phone coverage area within in your home. It means that you don’t have to connect your cell phone to anything. It works completely wireless. The more bars you want on your phone, the closer to the base unit you will have to stand. It works through walls inside your home. It also strengthens the 3G connection on your phone if it works in the 800MHz spectrum.

If you are in need of a cell phone signal and your phone works on the 800MHz frequency only, check out the zBoost Wi-Ex YX 500-CEL edition, you should see an improved signal as soon as you connect the device and turn it on.

Leave a Comment

Previous post:

Next post: