zBoost Wi-Ex YX500-PCS, Perfect Sprint Signal Booster

zBoost Wi-Ex YX500-PCS, Perfect Sprint Signal Booster

on July 8, 2010   |   1 comment

  • Share
  • Share

Do you have Sprint service inside your home and get a weak cell signal? If you do, then a cell signal booster is what you need. It’s hard to figure out exactly which cell signal booster is right for you. zBoost Wi-Ex YX500-PCS is the perfect cell booster solution for you. It works on the 1900MHz frequency.

The zBoost Wi-Ex 500-PCS series covers 2500 square feet and works with all phones that operate on the 1900MHz . The kit comes with everything you need, including coax connection cable, the outdoor antenna and the base unit.

Installation is simple. Place the outdoor antenna where you get the best cell phone signal. The spot can be on your roof, chimney or somewhere in your attic. It must be placed five feet away from metal in order to not distort the incoming cell phone signal. The coax cable is then used to attach the outdoor antenna to the amplifier, plug in the antenna and you should instantly see an improved signal.

The omni-directional antenna allows users to place it so not to point it towards the cell tower. It can get a signal from more than one cell tower. It comes with 50ft. of cable, so there’s also flexibility where you place the indoor repeater.

You’ll get an improved cell coverage are in your home. No direct connection to the amplifier is necessary. It’s completely wire free. If you want a more improved signal, stand closer to the amplifier located in the house. The closer to the amplifier, the more improved signal you’ll get. There doesn’t have to be a custom install. It’s simple to mount, run the coax cable to the amplifier and you should see an improved signal. If your 3G data runs on the 1900MHz frequency, you should see an improved data on your smart phone.

If you’re in need of an improved cell signal and you use Sprint and the 1900MHz frequency, check out the zBoost Wi-Ex YX500-PCS cell signal booster. It should provide a much better signal for your home. If you’re unsure which frequency your carrier uses, check out WirelessAdvisor.com. Input your Zip code and it will give you a complete list of operators and the frequencies they operate on.

Leave a Comment

{ 1 trackback }

Previous post:

Next post: