More Views
- PoE Injector delivers both data and power
- Low installation cost
- Maximum Output Power: 19.6 W
- Compatible with all Meraki MR Access Points
Meraki 802.3af PoE Injector - AU
Application & Usage
The Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Meraki 802.3af-compatible devices.
Easy Installation
An ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3af-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.
For more information about the Meraki 802.3af PoE Injector, please consult Meraki's Product Datasheet
Alternative versions available:
Alternative Power Source:
Meraki 12V AC Adapter (AC-MR-1-US) - Compatible with MR12, MR16 & MR24.
| Tech Specs | Data |
| Compatible with 10/100/1000 Mbit/s Ethernet, full duplex | |
| Power | Physical Dimensions |
| Input Voltage: 100 to 240 VAC Input Current: 0.5A max. for 90 VAC, 0.35A max. for 240 VAC AC Input Frequency: 47-63 Hz Maximum Output Power: 19.6 W Powered device can be up to 100m away from power injector |
5.98” x 2.56” x 1.42” (152 mm x 65 mm x 36 mm) Weight: 1.0 lb (450 g) |
| Mounting | |
| Mounts to walls (anchors and screws not included) | |
| Additional Features | Compatibility |
| Over-voltage and over-current protection Short-circuit protection |
Complies with 802.3af standard MR-Series Access Points |
| Environmental | LED Indicators |
| Operating Temperature: (32 to 104°F (0 to 40°C) Storage Temperature: (-16 to 149°F (-30 to 65°C) Operating Humidity: 5 to 90% |
Input Power Fault Detect/connected to valid 802.3af load |
