Direct Connection Cellular/PCS Dual-Band 824-894MHz / 1850-1990MHz Amplifier (811201)
|824-894 MHz / 1850-1990 MHz|
|10 dB / 14 dB|
Max Output Power
|+35 dBm / +15 dBm|
|3.5 dB nominal|
|± 2 dB / ± 2 dB|
|> 90 dB|
|12 V, 0.5-1.5 A max|
|FME-Male 50 ohms|
|5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)|
|1.32 lbs or 0.6 kg|
The Wilson 811201 is a dual band amplifier that is designed to attach directly to your phone, by using a Wilson cell phone adapter. By attaching the amplifier directly to your phone's antenna port, you can greatly increase the signal improvement.
The amplifier is dual band, and works will all US networks except Nextel. It will boost both voice and 3G data.
The kit needs an external antenna to work. Alternatively you can buy a pre-packaged kit.
There are many options for the exterior antenna for this kit.
To attach this kit you your phone you will need an adapter cable. We have adapter cables for most phone models - to check which one you need see our adapter cables category and check your phone/data card manufacturer. If your manufacturer is not listed, then you can try the Wilson SignalBoost kits, which have a universal adapter.
811201 Dual Band Direct Connect Amplifier
12V DC power adapter (car charger)
|Gain (up / down)||10dB / 14dB|
|Linear Output Power (up / down)||+35dBm / +15dBm|
|Noise figure||3.5 dB nominal|
|Power Requirements||12V DC, 0.5-1.5A max|
|Dimensions (inches)||5.5 x 4.3 x 1.4|
|Frequency detail (up/down)||824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz|
|Connector Type||FME Male|
|Instruction Manual||Instruction Manual (PDF)|