The Wilson Cellular SIGNALBOOST (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both 800MHz and 1900MHz cellular and PCS signals providing up to 3 Watts of output power on the 800MHz band and 2 Watts of output power on the 1900MHz (PCS) Band.
Works with all Cellular/PCS Service Providers except iDEN (Nextel/Southern LINC/Mike) and 1700MHz AWS (T-Mobile US 3G)
How the unit functions:
The 800MHz and 1900MHz cellular signal from the cell site is received by the Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the included built-in cradle antenna/coupler . When the phone transmits, the signal is sent to the amplifier through the cradle and then amplified and sent to the cell site through the outside antenna.
- Compatible with all cell phones
- Significantly improves voice and data signal quality
- Receives and transmits better than your cell phone
- Extends cell phone battery times
- Maximum 3 Watts Output Power on 800MHz
- Maximum 2 Watts Output Power on 1900MHz
- Compatible with all Cellular/PCS Carriers and technology (GSM/GPRS, CDMA, TDMA, AMPS/Analog) except iDEN (Nextel, Southern LINC, Mike)
- Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
- Power Control Logic ensures Maximum Output Power is within Cellular Standards
- Automatic Gain Control
- Can be Used in a Fixed or Mobile Application
- FCC and IC Type Accepted
- US and foreign Patents Pending
The 811210 Wilson SignalBoost is a direct-connect kit designed for in-vehicle use. The kit is dual band, as so provides voice and data improvements to all US networks except Nextel.
This kit includes the Wilson Phone Cradle.
This is not a full kit, and requires an external antenna.
The 811210 SignalBoost is a direct-connect dual band amplifier, which covers all US networks (except Nextel) and 3G data. The amplifier is powered by an included in-car 12V cigarette charger. For a more permanent installation, you can use the 12V hardwire adapter. It can also be powered by the Wilson 12V AC supply.
This is not a full repeater kit, as it requires an external antenna to collect the signal. You can chose from the wide range of Wilson mobile antennas, and pick the one most suited to your needs.
The direct-connect antenna is the Wilson Cell Phone Cradle Plus (301146), a versatile car cradle with a built-in antenna. Using the cradle not only extends cellular range and provides better coverage, but it allows drivers to keep both hands on the wheel when using their cell phones, greatly increasing safety. The cradle can fit any cellular phone, and when the phone is docked supports any hands-free device, including ear-buds and Bluetooth products. The cradle also has a broadcast antenna, which rebroadcasts the boosted signal around the vehicle, supporting many wireless users at once.
811210 SignalBoost Direct-Connect Amplifier
301146 Wilson Cradle Plus
12V DC Cigarette Lighter Adapter
|Gain (up / down)||26dB / 26dB|
|Linear Output Power (up / down)||+35dBm / +33dBm|
|Noise figure||3.5 dB nominal|
|Power Requirements||12V DC, 2A max|
|Dimensions (inches)||5 x 3.5 x 1.2|
|Frequency detail (up/down)||824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz|
|Connector Type||FME Male|